Menu
Wishlist (0) 0 0
LOGIN
Wishlist (0) 0 0
Home   商品   Male Stainless Steel Quick Disconnect (QD) w/Barb
 

Male Stainless Steel Quick Disconnect (QD) w/Barb

ブランド_BM

H507A

売り切れ

Made in the USA from 304 stainless steel.

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have.

The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 3/8" ID. Open port, does not have shut-off.

We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review.

Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.

コレクション: バーブ

カテゴリー: サイズ_1/2 タケノコ, 材質_ステンレス, 自体_バーブ, 規格_ワンタッチ（QD）

商品タイプ: 継手


関連した商品

 

Flare Fitting Set | 1/4 in. Swivel Nut & 5/16 in. Barb | 4 Pack | KOMOS®

売り切れ

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass.

Comes in a convenient zip lock bag.

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a...

この商品の詳細を見る
 

Stainless Flare Fitting Set | 1/4 in. Swivel Nut & Barb | KOMOS®

売り切れ

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel.

We recommend using 3/16" ID tubing for a tight fit.

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon...

この商品の詳細を見る
 

Stainless Barb - 3/4 in. Male BSP x 7/8 in.

売り切れ

This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection.

The barb is slightly undersized at 22mm (0.86") compared to 7/8" (0.87") but the difference should be negligible.

KegLand Part Number: KL06668

This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection. The barb...

この商品の詳細を見る