Monster Mill MM3 - Complete 3 Roller Mill Packages

Cowboy Craft LLC

MILL560

納期

商品の在庫状況によって異なるため、お気軽にお問合せ下さい。

商品詳細

The 3-Roller Monster is meant to compete and win against the best milling products available. With all the great features of the already popular MM-2, and the addition of a third roller, you'll be able to achieve the best crush around, at a higher throughput speed. The MM-3 crushes all your grain twice, with one pass through the mill. It starts with a preliminary crush through the initial fixed gap between the top two rollers, and then ends with a pass through the second gap between the drive roller, and the bottom third roller. The initial pass slightly flattens the grain, and gets it ready for the next crush, that breaks apart the grains and loosens the starch with minimal husk damage.

The MM-3 consists of a 6061 aluminum block frame with three 6" long steel rollers riding on SAE 841 oil impregnated bronze bushings. We use a superior grade of steel that is much harder than what is found on most comparable products and should last almost twice as long. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This makes it fine to drive the mill clockwise, or counter-clockwise. All the axles are 3/8", with minimal freeplay in the bushings.

One knurled steel roller is driven by a standard electric drill (not included) to feed the grain through the initial fixed gap of approximately .060", and then through the adjustable secondary gap and crush the grist. Both ends of the non-driven top idler roller ride in bronze bushings that are pressed into the frames, while the second idler roller rides in bushings that are offset mounted in an adjustable knob. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .065". Our knobs are made from 303 stainless steel for excellent durability, and are larger in diameter than the competition, as well as knurled for a positive grip. We've also added a groove in our newest design knobs with a matching rounded head on the thumbscrew that allows for a much better grip on the knob to avoid gap changes while milling, and also providing knob retention.

These Packages come complete with a Base, 3 Roller Monster Mill Body, and a Hopper. Choose whether to include the Hopper Extension, which upgrades Hopper capacity to a huge 39 lb!

Features:

  • Three six-inch steel rollers form two gaps, a preliminary fixed gap of approx .060", and a fully adjustable secondary gap.
  • Dual eccentric adjusters: 0 to .065" secondary gap - built from STAINLESS STEEL for no galling
  • 8 lbs / minute throughput
  • 3 x 6" hardened steel rollers
  • Rollers last for 12,000 - 15,000 lbs of grain
  • Drill-drive - CW, OR CCW
  • Alloy frame
  • SAE 841 oil impregnated bronze bushings
  • 1.5" diameter steel rollers
  • 3/8" integral drive shaft w/3 flats for drill driving, 2" long outside frame
  • 1144 alloy steel rollers

※日本では、アルコール度数1%以上の酒類を酒類製造免許なしに製造することは、酒税法により禁じられています。酒類製造免許を持たない方は、アルコール度数1%未満となるよう調整して下さい。
It is illegal in Japan to produce beverages with an alcohol content of 1% or greater without an alcohol production license. For those who do not have this alcohol production license, please adjust the alcohol content to less than 1%.

※個人使用目的のみ発送可能です。送先住所、電話番号が法人、各種事業所と結びつく場合、商用利用と見なされお届け出来ません。
For items for personal use only. If the shipping address or phone number is associated with a business, the order will be considered a commercial purchase and cannot be delivered via standard shipping.

※「個人で使用するために必要な量」と定められているため、商品により重量や個人消費の観点から数量調整をさせて頂くことがございます。
Item quantities may be adjusted to comply with definitions surrounding appropriate quanitites for personal use.

※送料は自動計算されますが船積みが必要な大型商品や重量超過商品に関しては別途お見積り依頼をお願いします。
Shipping is calculated automatically; however, please request a separate estimate for large or exceedingly heavy items requiring freight (sea) shipping.

詳しくはシッピングガイドをご参照下さい。
For more details please see the shipping guide.

ウィッシュリストに追加


関連した商品