Menu
Wishlist (0) 0 0
LOGIN
Wishlist (0) 0 0
Home   商品   Plastic Barb - 1/4 in. x 1/2 in. MPT
 

Plastic Barb - 1/4 in. x 1/2 in. MPT

ブランド_BM

H722

売り切れ

Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).

コレクション: バーブ

カテゴリー: サイズ_1/2 MPT 雄ネジ, サイズ_1/4 タケノコ, 材質_プラスチック, 自体_バーブ

商品タイプ: 継手


関連した商品

 

Flare Fitting Set | 1/4 in. Swivel Nut & 5/16 in. Barb | 4 Pack | KOMOS®

売り切れ

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass.

Comes in a convenient zip lock bag.

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a...

この商品の詳細を見る
 

Stainless Flare Fitting Set | 1/4 in. Swivel Nut & Barb | KOMOS®

売り切れ

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel.

We recommend using 3/16" ID tubing for a tight fit.

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon...

この商品の詳細を見る
 

Stainless Barb - 3/4 in. Male BSP x 7/8 in.

売り切れ

This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection.

The barb is slightly undersized at 22mm (0.86") compared to 7/8" (0.87") but the difference should be negligible.

KegLand Part Number: KL06668

This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection. The barb...

この商品の詳細を見る