US Sankey Low Profile Keg Coupler - D System



The D System keg coupler, also known as the American Sankey, is the most common system available in the U.S. It is used by all the major breweries—Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler.

With standard keg couplers, you need some clearance above the top of your keg. With this low-profile design, this keg coupler only sticks up less than an inch above the rim; so you’ll have an easier time installing and operating your keg setup in limited space. Use for: All beers, wine, cider


  • Low profile design for tight clearance installations
  • Twist handle
  • NSF certified
  • 304-grade stainless steel body
  • 304-grade stainless steel probe
  • 304-grade stainless steel tailpiece for 3/16" I.D. beer hose
  • 304-grade stainless steel tailpiece for 3/8" I.D. gas hose
  • Easy to install and use
  • For home or commercial use

Visit our beer brand/coupler system page to see a full listing of beers that use the D System valve.

To Tap: place probe in extended position, align keg lugs and insert into keg valve. To tap keg push down and turn clockwise to stop.

CAUTION: This low profile coupler does not turn off gas when coupler is untapped. Shut off gas supply when untapping/releasing coupler from keg. Lever handle couplers turn off gas when untapped.