Stainless Joiner | 1/2 in. Barb x 1/2 in. Barb | KOMOS®

5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass.

Comes in a convenient zip lock bag.

1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel.

We recommend using 3/16" ID tubing for a tight fit.

This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection.

The barb is slightly undersized at 22mm (0.86") compared to 7/8" (0.87") but the difference should be negligible.

KegLand Part Number: KL06668