ブランド_BM
HRD154
売り切れ $3.99
販売再開時に通知を受け取りますか?:
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" to 1/4" ID tubing to 5/16" to 3/8" ID tubing. The barbs are slightly undersized at 6 mm (0.24") and 8 mm (0.31").
Made from 304 stainless steel.
コレクション: バーブ
カテゴリー: サイズ_1/4 タケノコ, サイズ_5/16 タケノコ, 材質_ステンレス, 自体_バーブ
商品タイプ: 継手
売り切れ $14.99
5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. The barb is made from stainless steel. The nut is made from nickel plated brass.
Comes in a convenient zip lock bag.
5/16 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a...
1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Plastic quick disconnects (QDs) on the other hand, have a built-in washer so the additional nylon flare washer is not needed. The barb and nut are both made from stainless steel.
We recommend using 3/16" ID tubing for a tight fit.
1/4 in. barb and 1/4 in. swivel nut for flare fitting connections. If you're connecting to stainless steel or brass, you will also need a nylon...
売り切れ $4.99
This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection.
The barb is slightly undersized at 22mm (0.86") compared to 7/8" (0.87") but the difference should be negligible.
KegLand Part Number: KL06668
This Stainless Steel BSP barb will connect any tubing with a 7/8" ID line to any fitting with a 3/4" Female BSP connection. The barb...